Coefficient of Variation Calculator
Find the coefficient of variation (CV) from your data, or from a mean and standard deviation. See how large the spread is compared with the average, with a clear step-by-step solution.
Coefficient of Variation Calculator
Choose how you want to calculate, enter your numbers and get your result instantly.
Step-by-Step Solution
What Is the Coefficient of Variation?
The coefficient of variation, often written as CV, compares the size of the standard deviation with the size of the mean. It is also called the relative standard deviation (RSD). It is usually shown as a percentage.
A small CV means the values are close to the mean, so the data is consistent. A large CV means the values are spread out widely compared with the mean.
Because the CV is a ratio, it has no units. This is what makes it useful for comparing data sets that are measured in different units or on very different scales.
How to Calculate the Coefficient of Variation
You can find the CV by hand in three steps.
1. Find the mean
Add all the values and divide by how many there are. You can check it with our Average Calculator.
2. Find the standard deviation
Use the sample standard deviation if your data is a part of a larger group, and the population standard deviation if it includes every member. Our Standard Deviation Calculator shows both.
3. Divide and convert to a percentage
Divide the standard deviation by the mean, then multiply by 100 to get a percentage.
Coefficient of Variation Examples
Example 1: from a mean and a standard deviation
A data set has a mean of 50 and a standard deviation of 10.
CV = (10 ÷ 50) × 100% = 20%.
Example 2: from a data set
Find the coefficient of variation of this population data:
The mean is 5 and the population standard deviation is 2, so CV = (2 ÷ 5) × 100% = 40%. If you treat the same data as a sample, the standard deviation is about 2.1381 and the CV is about 42.7618%.
Example 3: comparing two groups
Group A has a mean of 50 and a standard deviation of 5. Group B has a mean of 200 and a standard deviation of 10.
The CV of Group A is (5 ÷ 50) × 100% = 10%, and the CV of Group B is (10 ÷ 200) × 100% = 5%. Group B has the larger standard deviation, but compared with its mean it is the more consistent group.
More CV Calculation Examples
These extra worked examples show a full CV calculation step by step, a comparison across different units, a CV above 100%, and how to find the CV when you only know the variance. Remember that CV = (standard deviation ÷ mean) × 100%.
Example 4: CV calculation step by step for 10, 12, 14, 16, 18
Answer: the sample CV is about 22.59%, and the population CV is about 20.20%.
Step 1: find the mean. The sum is 10 + 12 + 14 + 16 + 18 = 70, and there are 5 values, so the mean is 70 ÷ 5 = 14.
Step 2: find the squared distances from the mean. The differences are −4, −2, 0, 2 and 4, and their squares are 16, 4, 0, 4 and 16. The total is 40.
Step 3: find the standard deviation. For a sample, the variance is 40 ÷ (5 − 1) = 10, so the standard deviation is √10 ≈ 3.1623. For a population, the variance is 40 ÷ 5 = 8, so the standard deviation is √8 ≈ 2.8284.
Step 4: divide by the mean and multiply by 100. Sample: (3.1623 ÷ 14) × 100% ≈ 22.59%. Population: (2.8284 ÷ 14) × 100% ≈ 20.20%. Use the sample version when your data is only part of a larger group.
Example 5: Comparing data in different units
A group of people has an average height of 170 cm with a standard deviation of 8 cm, and an average weight of 68 kg with a standard deviation of 12 kg. Which varies more?
Answer: weight varies more.
You cannot compare 8 cm with 12 kg directly, because the units are different. The CV removes the units. For height, CV = (8 ÷ 170) × 100% ≈ 4.71%. For weight, CV = (12 ÷ 68) × 100% ≈ 17.65%. Weight is spread out much more compared with its average.
Example 6: A CV greater than 100%
A data set has a mean of 10 and a standard deviation of 15. What is the CV?
Answer: the CV is 150%.
CV = (15 ÷ 10) × 100% = 150%. A CV above 100% means the standard deviation is larger than the mean, so the values are very spread out compared with their average. This is common in skewed data, such as incomes or the number of daily website visits.
Example 7: Finding the CV from the variance
A data set has a variance of 25 and a mean of 20. What is the CV?
Answer: the CV is 25%.
The standard deviation is the square root of the variance, so the standard deviation is √25 = 5. Then CV = (5 ÷ 20) × 100% = 25%. If you only have the variance, take the square root first. You can also find the variance of your own data with our Variance Calculator.
Common mistakes in a CV calculation
The most common mistake is forgetting to multiply by 100, which leaves the answer as a decimal instead of a percentage. Another is dividing the mean by the standard deviation instead of the other way around. Also keep the same type of standard deviation throughout, sample or population, and do not mix them. To get the standard deviation first, use our Standard Deviation Calculator.
Created by Sajid Ali, SmartStatCalc · Last updated: 7 November 2026
Found a mistake or have a suggestion? Contact us.
How to Interpret the CV
The lower the CV, the less the data varies compared with its mean. There is no single limit that applies everywhere, because what counts as a high or low CV depends on the field. In some laboratory work a CV of a few percent is expected, while in other areas much larger values are normal.
The CV is most useful for comparing the relative spread of two or more data sets, for example the prices of two products, or the results of two different measuring methods.
When Not to Use the CV
The CV works best for data that is measured on a ratio scale, where zero means none of the quantity, such as height, weight, price or time. It should be used with care in these cases:
- A mean near zero: dividing by a very small number makes the CV huge and unstable. If the mean is exactly zero, the CV cannot be calculated.
- Negative values or a negative mean: the result is hard to interpret, so our calculator asks for a mean greater than zero.
- Scales without a true zero: for temperatures in Celsius or Fahrenheit, the CV changes depending on the scale you use, so it is not meaningful.
To describe spread using the actual units of your data instead, use the Variance Calculator or the Range Calculator.
How to Use Our Coefficient of Variation Calculator
- Choose a calculation method: your own data set, or a mean and standard deviation you already know.
- Enter your numbers in the boxes. For a data set, choose sample or population.
- Click the Calculate CV button.
- Read the CV as a percentage, along with the mean and the standard deviation.
- Use the step-by-step solution to see how the answer was found.
Click Reset at any time to clear everything and start again.
Why Use SmartStatCalc?
SmartStatCalc is built to make everyday statistics quick and easy to understand. Instead of working out the mean and the standard deviation by hand, you can enter your data and see a clear result right away.
Who Can Use a Coefficient of Variation Calculator?
Students use the CV in statistics and science classes. Researchers and lab teams use it to check how consistent their measurements are, and analysts use it to compare the variability of prices, returns or other figures that sit on different scales.
Frequently Asked Questions
What is the coefficient of variation in simple words?
It is the standard deviation shown as a percentage of the mean. It tells you how big the spread is compared with the average.
What is the formula for the coefficient of variation?
CV = (standard deviation ÷ mean) × 100%.
Is a high or a low CV better?
It depends on your goal. A low CV means the data is more consistent, which is usually wanted for measurements and quality checks. A high CV is not always bad, since some data is naturally more variable.
Can the CV be greater than 100%?
Yes. This happens when the standard deviation is larger than the mean, which means the data is very spread out compared with its average.
Should I use the sample or the population standard deviation?
Use the sample standard deviation if your data is only a part of a larger group, and the population standard deviation if your data includes every member of the group.
Why can the CV not be calculated when the mean is zero?
The formula divides by the mean, and dividing by zero is not possible.
Is the CV the same as the standard deviation?
No. The standard deviation is in the same units as your data, while the CV is a percentage that compares the standard deviation with the mean.
Is this Coefficient of Variation Calculator free?
Yes. SmartStatCalc's Coefficient of Variation Calculator is free to use online.
Contact SmartStatCalc
Have a question, suggestion, or feedback about our calculators? We want to make SmartStatCalc more useful, accurate, and easier for everyone to use.
If you spot a mistake or have an idea for another statistics tool, we would be happy to hear from you.
Cite this calculator
If you use this calculator in your work, you can cite it like this:
SmartStatCalc. (2026). Coefficient of Variation Calculator. https://smartstatcalc.com/coefficient-of-variation-calculator/
Related Calculators
Explore more free statistics tools from SmartStatCalc.